Initializing The Modes; Warning/Alarm Indications - Panasonic NV-GS 8 EGE Operating Instructions Manual

15EGE-ENG.book 46 ページ ２００４年２月９日 月曜日 午前１１時１０分
¥ (White):
DPOF Setting completed (set to
1 or more picture)
: [640k480] Image size
640
≥For images not recorded with this Movie
Camera, the size display is determined as
follows according to the number of horizontal
pixels.
: 640 or more, less than 800 (The
640
size is not displayed at under
640 pixels.)
: 800 or more, less than 1024
SVGA
: 1024 or more, less than 1280
XGA
: 1280 or more, less than 1600
SXGA
: 1600 or more, less than 2048
UXGA
: 2048 or more
QXGA
(Cyan): Photoshot Mode
PICTURE
(Red): While Photoshot recording is
PICTURE
activated
(Green): While the card is being read
PICTURE
(Red): No Card (Still Picture Mode)
PICTURE
ª To Change the Counter Display Mode
By changing [C.DISPLAY] on the [DISPLAY]
Sub-Menu, you can change the Counter Display
Mode to Tape Counter Indication [COUNTER]
(0:00.00), Memory Counter Indication [MEMORY]
(M0:00.00), and Time Code Indication
[TIMECODE] (0h00m00s00f). (
pressing the [DISPLAY] Button on the Remote
Controller, you can change the Counter Display
Mode.
ª To Display Date/Time Indication
To display Date/Time Indication, set the
appropriate Date/Time in [DATE/TIME] on the
[DISPLAY] Sub-Menu. (
-15-
You can also press the [DATE/TIME] Button of
the Remote Controller repeatedly to display or
change the Date/Time Indication.
ª To Change the Display Mode
By changing [DISPLAY] on the [DISPLAY]
Sub-Menu, you can change the Display Mode to
All Function Display [ALL] and Minimum Display
[OFF]. ( )
-15-
ª Progressive Photoshot
You cannot use the Progressive Photoshot
Function in the following cases.
When using Tape Recording Mode
≥Digital Effect Modes in [EFFECT1]
≥Digital Zoom [D.ZOOM]
≥1/750 s or faster shutter speed
≥When brightness is insufficient
≥When the Night View Function is ON
≥When the Portrait Mode is used
≥When the Built-in LED Video Light lights and the
Gain Up mode is set to on.
Others
When using Card Recording Mode
(NV-GS15 only)
-37-
≥When brightness is insufficient
≥When the Night View Function is ON
≥When the Built-in LED Video Light lights and the

Initializing the Modes

You can change the Menu settings back to the
shipping condition.
1
≥Initializing will not erase the clock setting (

Warning/Alarm Indications

If any one of the following indications lights up or
flashes, please check the condition of the Movie
Camera.
3DEW (DEW DETECT/EJECT TAPE):
Y (CHECK REC TAB/TAPE NOT INSERTED):
) By repeatedly
-15-
6 (LOW BATTERY):
)
0: The built-in battery is low.
: (NEED HEAD CLEANING):
2END (TAPE END):
REMOTE (CHECK REMOTE MODE):
UNPLAYABLE TAPE
(OTHER FORMAT):
UNABLE TO A. DUB
(LP RECORDED):
INCOMPATIBLE TAPE:
-46-
Gain Up mode is set to on.
Set [INITIAL] >> [INITIAL SET] >> [YES].
≥The initializing takes a little while.
≥After the initializing is completed, the
[COMPLETED] Indication appears with
beeps.
that has been adjusted.
Condensation has occurred.
You are attempting to record pictures on a
Tape with setting the accidental erasure
prevention slider to [SAVE].
You are attempting Audio dubbing or Digital
dubbing on a Tape with setting the
accidental erasure previntion slider to
[SAVE].
No Cassette is inserted.
The Battery is low. Recharge it.
The video heads are dirty.
The tape came to the end during recording.
Wrong Remote Controller Mode has been
selected.
-9-
You are attempting to play back a tape
section that has been recorded with a
different TV system.
Because the original recording was done in
LP Mode, audio dubbing cannot be
performed.
This cassette is incompatible.
)
-17-
-53-
-12-
-9-
-18-
-54-