Using The Viewfinder; Power Supply - Panasonic PV-GS250 Operating Instructions Manual

Digital video camcorder
Hide thumbs Also See for PV-GS250:
Table of Contents

Advertisement

Using the viewfinder

Extending the viewfinder
1
Pull out the viewfinder and extend it by
pulling the extension knob.
Lifting up the viewfinder
1
Lift it up by pinching the viewfinder
extension knob.
Adjusting the field of view
1
Adjust the focus by sliding the eyepiece
corrector knob.
12:30:45PM
12:30:45PM
12:30:45PM
OCT 15 2005
OCT 15 2005
OCT 15 2005
You can adjust the brightness of the viewfinder
from the menu.
16
LSQT0862
Before using
12:30:45PM
OCT 15 2005

Power supply

Charging the battery
When this product is purchased, the battery is not
charged. Charge the battery before using this
product.
Battery charging time (
We recommend using Panasonic batteries.
If you use other batteries, we cannot guarantee
the quality of this product.
If the DC input lead is connected to the AC
adaptor, then the battery will not charge.
Remove the DC input lead from the AC adaptor.
1
Connect the AC cable to the AC adaptor and
the AC jack.
2
Put the battery on the battery mount by
aligning the mark, and then securely plug it
in.
Charging lamp
Lights up: Charging
Goes off: Charging completed
Flashing: The battery is over discharged
(discharged excessively). In a while,
the lamp will light up and normal
charging will start.
When the battery temperature is
excessively high or low, the [CHARGE]
lamp flashes and the charging time will
be longer than normal.
)
-17-

Advertisement

Table of Contents
loading

Table of Contents