Panasonic PV-GS250 Operating Instructions Manual page 55

When the Camcorder and personal
computer (with Windows 2000) are
connected via USB cable, a message, such
as the one below, is displayed. However,
testing by the manufacturer has confirmed
functionality of this Camcorder with
Windows 2000. Click [Yes] and proceed.
For Windows 98SE/Me users, "USB Audio
Device" is required. Click [Next] and
proceed.
If you use Windows 98SE, the OS installation
CD may be required.
For Windows 98SE/Me Users
The following messages may be displayed during
the installation depending on the environment of
the personal computer. Install the USB Driver as
instructed below.
1) The message "The file 'kstvtune.ax' on
[Unknown] cannot be found..." is
displayed.
Enter "C:\Windows\system" for
Windows 98SE.
Enter "C:\Windows\options\CABS" for
Windows Me.
If the "kstvtune.ax" file is missing in one of
the 2 above-mentioned folders, insert the
OS CD-ROM and assign the path.
2) The message "The file 'ksclockf.ax' on
[Unknown] cannot be found..." is
displayed.
Enter "C:\Windows\system".
If the "ksclockf.ax" file is missing in the
above mentioned folder, insert the OS
CD-ROM and assign the path.
You may click [Browse] to look for and assign
the path.
5
Start Windows Messenger (for Windows XP
users) or MSN Messenger (for Windows
98SE/Me/2000 users).
Click [Start] >> [Programs] >>
[Windows Messenger] or [MSN Messenger].
With a PC
When you use Windows XP, the other parties
via the network have to use Windows
Messenger on Windows XP. When you use an
operating system other than Windows XP, the
other parties via the network have to use MSN
Messenger on an OS other than Windows XP.
If the Camcorder is used as a Web Camera, the
quality of the video to be exchanged will depend
on the Internet connection status.
In the WEB CAMERA mode, video cannot be
recorded onto a tape or a card.
You cannot output the video input from the DV
terminal to the display of the PC.
In the WEB CAMERA mode, the audio may be
interrupted in the middle of communication
depending on the communication environment
or the performance of the personal computer.
Setting up Windows Messenger
When starting Windows Messenger for the first
time, its setup screen is displayed. (However, the
screen is not displayed if the Windows
Messenger setup has already been done.) For
more details, please read the corresponding Help
file.
1
Click [Click here to sign in].
2
Select [.NET Messaging Service] and click
[OK].
3
After the .NET Passport Wizard is displayed,
click [Next].
Please refer to the instruction manual of your
personal computer for how to configure the
audio and the microphone.
To communicate with persons using Windows
in other languages, setting up using
alphabets or numbers is recommended.
4
According to the procedures displayed on
the screen, continue the setup.
5
After the setup is completed, sign in and
start Windows Messenger.
Windows Messenger is activated.
55
LSQT0862