Deleting Files Recorded On A Card - Panasonic PV-GS250 Operating Instructions Manual

To display multiple playback files
Multiple files on the card (6 files on 1 screen) are
displayed.
1
Move the [ /VOL ] lever to switch the
images.
Towards [ ]: Full-screen display
(Displays 1 image.)
Towards [ ]: Multi-screen display
(Displays 6 files on 1 screen.)
In the multi-screen display,
Move the joystick to select a file (The
selected file will be encircled by a yellow
frame) and press it. The selected file is
full-screen displayed.
If there are 7 files or more, move the joystick.
The next, or previous multi-screen will be
displayed.
About the compatibility of still
pictures
The Camcorder is compliant with the unified
standard DCF (Design rule for Camera File
system) established by JEITA (Japan
Electronics and Information Technology
Industries Association).
The file format supported by this Camcorder is
JPEG. (Not all JPEG formatted files will be
played back.)
If a non-standard file is played back, the folder/
file name may not be displayed.
The Camcorder may degrade or not play back
data recorded or created on another product
and another product may degrade or not play
back data recorded with the Camcorder.
44
LSQT0862
Playback mode

Deleting files recorded on a card

The deleted files cannot be restored.
Set to Picture Playback Mode.
1
Move the joystick left or right to select a file
to delete.
You can select a file in the multi-screen display.
After selecting the file, press the joystick and
display the operation icon.
2
Move the joystick down to select [
3
Move the joystick up or down in order to
select [DELETE 1 FILE] and then press it.
4
When the confirming message appears,
select [YES] and press the joystick.
In order to stop deletion, select [NO].
To delete all files
1
Move the joystick down to select [
2
Move the joystick up or down in order to
select [ALL FILES] and then press it.
3
When the confirming message appears,
select [YES] and press the joystick.
In case of [ALL FILES], the deletion may take
time if there are many files on the card.
When "CARD FULL" is shown during recording,
switch to the Picture Playback Mode and then
delete unnecessary files.
If there are no files to delete, insert a new card.
If files conforming to DCF standard are deleted,
all the data related to the files will be deleted.
Deleting still picture files recorded on
a card by other equipment
A still picture file (other than JPEG) that cannot
be played back on the Camcorder may be
erased.
Note:
To delete multiple files on the SD Card (selected
files) connect to a PC and use the SD Drive
feature.
].
].