Data Logging; Data Load - GPS Tracker GPS102 User Manual

"monitor" mode.
5.12.4 Send SMS "tracker+password" to the unit, it will reply "tracker ok!" and restore to
"track" mode.

5.13 Data logging

5.13.1 Auto logging：When the tracker devices lost GSM signals or fall offline from GPRS,
tracker will store the tracking position and alerts automatically in the flash upon the pre-set
condition, when GSM signals get back, all the event alerts will be auto-sent to the authorized
numbers or monitoring platform (server), but the stored tracking data should be loaded to the
monitoring platform via SMS command.
5.13.2 Logging upon times: Send SMS: "save030s005n+password" to the tracker unit, it will
reply "save ok", and will store the lat, long locations every 30 seconds for 5 times. (S: second,
m: minute; h: hour).
5.13.3 Multi-logging：Send sms:"save030s***n+ password" to tracker device, it will reply
"save ok".
5.13.4: logging Clearance: send SMS: "clear+ password" to tracker device, it will reply "clear
ok".
5.13.5：Logging Volume: Built-in flash 1MB (store about 16,000 positions); expanded volume
depends on the SD card inserted.
5.13.6 The logged data can be copied to computer via the USB cable in the package. The route
of the stored data can be seen by importing data in the menu "Data Import" of web platform
www.gpstrackerxy.com

5.14 Data Load

5.14.1 Current date Load: Send SMS: "load+ password" to tracker device, it will reply: "load
ok" if the device is working well under GPRS mode; if not, it will reply "load fail! Please check
10