Data Logging; Data Load - GPS Tracker GPS303CD User Manual

13

6.15.Data logging

6.15.1 When the tracker device loses GSM signals or fall offline from GPRS, tracker will
store the tracking position and alerts automatically upon the pre-set condition, when GSM
signals get back, all the event alerts will be auto-sent to the authorized numbers or monitoring
platform (server), but the stored tracking data should be loaded to the monitoring platform via
SMS command.
6.15.2: Storage upon times: Send SMS: "save030s005n+password" to the tracker unit, it will
reply "save ok", and store the lat, long locations every 30 seconds for 5 times. (S: second, m:
minute; h: hour).
6.15.3 Unlimited storage：Send sms:"save030s***n+ password" to tracker device, it will
reply "save ok".
Cancel logging: Send SMS "nosave+password", e.g. nosave123456
6.15.4: Storage Clearance: Send SMS: "clear+ password" to tracker device, it will reply
"clear ok".
It depends on the capacity of the SD card inserted in the
6.15.5：Storage Volume:
tracker device.
The stored data in SD card can be copied to computers through card
6.15.6:
reader, and then the data route can be checked by importing data in the menu
"Data Import" of web platform www.gpstrackerxy.com

6.16. Data Load

Current date Load: Send SMS: "load+ password" to tracker device, it will
6.16.1
reply: "load ok" if the device is working well under GPRS mode; if not, it will
reply "load fail! Please check gprs" that means device does not work under
GPRS mode. Data can only be loaded to monitoring platform by GPRS.