Provision ISR UltraVision Series Manual page 20

ZONE NUMBER
- Scroll to ZONE NUMBER using ▲ or ▼.
- Use ◄ or ► to select ZONE1 – ZONE 8.
ZONE STATE
- Scroll to ZONE STATE using ▲ or ▼.
- Use ◄ or ► to set ON/OFF.
WIDTH
Enlarge or decrease the horizontal size of the zone
- Scroll to WIDTH using ▲ or ▼.
- Use ◄ or ► to change width 16 – 90.
HEIGHT
Enlarge or decrease the vertical size of the zone.
- Scroll to HEIGHT using ▲ or ▼.
- Use ◄ or ► to change height 12 – 54.
MOVE X
Moves horizontal position of the zone.
- Scroll to MOVE X using ▲ or ▼.
- Use ◄ or ► to move left or right 8 – 92.
MOVE Y
Moves vertical position of the zone
- Scroll to MOVE Y using ▲ or ▼.
- Use ◄ or ► to move up or down 26 - 74.
37
SENSITIVITY
You can set different sensitivity level to each zone. The more
sensitive the detection is, it would detect even smaller motion, but
it might cause more false alarms, and vise versa.
- Scroll to SENSITIVITY using ▲ or ▼.
- Use ◄ or ► to change sensitivity level 0 – 100.
INITIAL SET – Back to factory default
PREVIOUS – Return to previous me
PRIVACY MASK
This function is aiming at the protection of personal privacy, You
can select up to 8 parts on the screen to be masked with colored
cover.
Size and location of the area is also adjustable.
- Scroll to PRIVACY MASK using▲ or ▼
<SPECIAL MENU>
MOTION DET
PRIVACY MASK
LANGUAGE
STABILIZER
L/L SYNC
MONITOR TYPE
FACTORY RESET
COMM SET
PREVIOUS
- Press O and,the PRIVACY MASK MENU will appear.
OFF
OFF
ENG
OFF
INT
LCD
38