REMEHA Gas 310 ECO Technical Information page 36

Code
1 37
2 03
3 53
4 40
5 58
6 63
7 + 8 00
9 18
a 11
b 80
c 26
26
d
67
e
table 14 Shut-off mode in service level
The letters and numbers in the code window and the t
window are explained in appendix 16.2.
12.5 Counter mode (1, , and .) (service level)
12.5.1 General
The boiler control records various data on the combustion
trend of the boiler. This data can be read out in counter
mode. The following data can be read out:
- Hours run
- Number of successful ignition attempts
- Total number of start attempts
- Number of shunt pump operating hours
- Number of shunt pump starts
- Number of internal resets (control unit)
- Number of hours energised (control unit)
12.5.2 Reading out counter mode
First enter the service code c 12 (see section 13.2).
Press the m key until the required code (see table 15)
appears in the code window.
Hours run
1
Number of successful ignition attempts
2
Total number of start attempts
3
Number of shunt pump operating hours
4
Number of shunt pump starts
5
Number of internal resets (control unit)
6
Number of hours energised (control unit)
7
table 15 Counter mode codes
62560.indd 36 62560.indd 36
Description
t
Shut-off code (see table 23)
Operating code, at shut-off intervention (section 12.1)
Flow temperature, at shut-off intervention
Return temperature, at shut-off intervention
Flue gas temperature, at shut-off intervention
Boiler block temperature, at shut-off intervention
Time from shut-off intervention (with PC software only)
Ionisation level (analog), at shut-off intervention
Operating hours (hundred thousands and ten thousands)
Operating hours (thousands and hundreds)
Operating hours (tens and units)
Fan speed at shut-off intervention (thousands and hundreds)
Fan speed at shut-off intervention (tens and units)
Gas 310 ECO
The counter has 6 digits. The code window displays
the following (in sequence):
code figure, ,, . with a value in the t window.
Meaning of readout in t window
Code Total number or total number of hours in
figure hundred thousands and ten thousands
Total number or total number of hours in
,
thousands and hundreds
Total number or total number of hours in
.
tens and units
table 16 Counter mode readout
Example:
t window
code window
1 21
, 57
. 53
This means 215753 Hours run
36
Remeha
value
210000
5700
53
18-6-2009 13:14:59 18-6-2009 13:14:59