Table of Contents
Advertisement
Installation of Storage Tank
Apply Teflon tape in a clockwise direction around the
Step 15
male pipe threads on the tank.
Thread the ball valve (supplied in the parts bag)
Step 16
onto the stainless steel connector on the tank.
Note: Do not over tighten plastics connections.
Step 17
Thread 1/4" plastic connector fitting (supplied in the parts bag) into
the ball valve attached to the tank.
Connecting the Tank
Step 18
Postion the tank in the desired location.
Stand it upright or using black plastic
stand lay it on it's side. Connect remaining
blue tube from he RO module over to the
tank ball valve connector.
Step 19
Push blue tube into the connector on the end of ball valve
until it stops. Use a wrench to securely tighten the nut on the
connector.
7
Advertisement
Table of Contents
