Table of Contents
Advertisement
Installation of Faucet
Caution: Porcelain sink surface material is extremely hard and may crack or chip. Use extreme
caution when drilling. Watts accepts no responsibility for damage resulting from the installation
of the faucet.
Black Rubber Washer
Black Locating Washer
(used where a 1/2" hole is
available, reverse when
mounting on stainless steel
or when using drilled hole)
Brass Insert (sleeve)
Step 1
Determine desired location to drill a hole for the faucet on your sink.
Step 2
Using a variable speed drill on the slowest speed, drill a 7/16" hole for the
f aucet .
it may cause the porcelain to crack or chip).
Step 3
Place the escutcheon chrome plate and the black rubber washer on the faucet shank.
(Parts found in faucet parts bag).
Step 4
Insert the faucet shank through the hole in sink and let it rest on the sink top.
Step 5
From the underside of the sink slide on the locating washer, lock washer and brass
nut onto the shank. Check orientation of faucet then tighten brass nut securely.
Escutcheon Plate
Plastic Sleeve
1/4" Compression Nut
Use water to keep the drill bit cool while drilling. (If the drill bit gets hot
4
Counter Top/Sink
Lock Washer
Nut
Shank
1/4" Tube
Advertisement
Table of Contents
