Table of Contents
Advertisement
7
SOS Button
8
Microphone
10
OBDII Plug
4. Quick Start
4.1 Insert the SIM Card
SIM Card：
Remove the cover of SIM card and insert SIM card as picture (chip down), then
refit the cover.
Notice：
Make sure there is enough charge (test it by SMS and Call after the SIM card
inserted );
Make sure turn off the PIN function of the SIM card ;
Make sure you have set Caller Identification function if you want so.
4.2 Charge the Battery
Please charge TC68S for at least 3 hours by the USB cable while the first using. To shorten the charging time,
please turn off TC68S while charging.
4.3 LED Indicators
Press and hold the Power On/Off button for 3~5 seconds to turn on/off TC68S. Once insert TC68S into OBD II
connector in the vehicle, the buzzer will alarm BI.
GPS LED (Blue)
Status
On
Fast Flashing (every 0.1 sec)
Fast Flashing (0.1 sec on, 2.9 sec off)
Slow Flashing (1 sec on per 2 secs )
GSM LED (Green)
Status
Copyright © 2014 Meitrack Group All rights reserved.
File Name
MEITRACK TC68S User Guide
Project
TC68S
Sub Project
User Guide
Revision
V1.2
In the case of emergency, press and hold the button for two seconds, and the
device will beep to alert users.
Meanwhile, device will dial 3 authorization phone numbers in turn until one of
them pick up the phone. In addition, SMS will be sent to the authorized number.
GPRS will be sent to the platform when the GPRS is available.
In sleep mode, use a short press to wake up the device.
The microphone is automatically turned on when listen-in function is activated.
Insert the OBD II connector, powered by vehicle's battery.
Notice
Please turn off TC68S before insert the SIM card
：
Description
Button pressed or input triggered
Initialization or low battery
GPS fixed
No GPS fixed
Description
Creator
Creation Date
Update Date
Page
Confidential
External Documentation
Insert SIM Card
Renny Lee
2012-07-13
2014-02-26
7 of 16
-7-
Advertisement
Table of Contents
