Subscribe to Our Youtube Channel
Related Manuals for MeiTrack TC68E
Summary of Contents for MeiTrack TC68E
- Page 1 MEITRACK TC68E Plug-and-Play Vehicle GPS Tracker User Guide MEITRACK TC68E Plug-and-Play Vehicle GPS Tracker User Guide Copyright © 2022 Meitrack Group All rights reserved. - 1 -...
- Page 2 MEITRACK TC68E Plug-and-Play Vehicle GPS Tracker User Guide Change History File Name MEITRACK TC68E Plug-and-Play Vehicle GPS Tracker User Guide Project TC68E Creation Date 2022-08-06 Update Date Subproject User Guide Total Pages Version V1.0 Confidential External Documentation Copyright © 2022 Meitrack Group All rights reserved.
-
Page 3: Table Of Contents
5.4 Configuring Device Parameters by Meitrack Manager ................- 12 - 5.4.1 Setting the IP Address and Port ......................- 12 - 5.5 Setting the Bluetooth Temperature and Humidity Sensor and Beacon by Meitrack Manager ....- 12 - 5.6 Logging In to MS03 Tracking System ......................- 14 - 6 OBD Function ................................ -
Page 4: Copyright And Disclaimer
The user manual may be changed without notice. Without prior written consent of Meitrack Group, this user manual, or any part thereof, may not be reproduced for any purpose whatsoever, or transmitted in any form, either electronically or mechanically, including photocopying and recording. -
Page 5: Product Introduction
With a standard OBD II plug, it can be easily installed. When the device is removed, an instant alert will be received. The TC68E tracker is a perfect choice for private cars and other motor vehicles equipped with an OBD II connector. -
Page 6: Alerts
GPS log When the GPS is valid, the device will record the driving routes at the preset time interval. You can use Meitrack Manager software to read these records. A maximum of 130,000 records can be stored. GPS + LBS positioning When a valid GPS signal cannot be received, the GSM base station will be used for assisted positioning to ensure that the vehicle can be located at any time. -
Page 7: Appearance
WiFi function The device supports the 2.4 GHz WiFi hotspot function, and a maximum of eight WiFi (optional) networks can be connected. You can use Meitrack Manager software to configure the WiFi function. 4 Appearance GPS LED Indicator... -
Page 8: How To Use
MEITRACK TC68E Plug-and-Play Vehicle GPS Tracker User Guide Item Description USB port The USB port is used to charge the device, configure device parameters, and upgrade software. GSM LED indicator Indicates the GSM status. For details, see the section 5.2 "LED Indicator."... -
Page 9: Tracking By Mobile Phone
MEITRACK TC68E Plug-and-Play Vehicle GPS Tracker User Guide seconds off) GSM LED Indicator (Green) There is an incoming call, or the subscriber you dialed is busy Steady on now. Blink fast (once every 0.1 seconds) The device is being initialized. -
Page 10: Setting Authorized Phone Numbers - A71
If your mobile phone does not support HTTP, enter the latitude and longitude on Google Maps to query a location. More SMS commands You can configure the device on a mobile phone or on a computer by using Meitrack Manager. For details, see the section 5.4 "Configuring Device Parameters by Meitrack Manager."... -
Page 11: Setting The Smart Sleep Mode - A73
MEITRACK TC68E Plug-and-Play Vehicle GPS Tracker User Guide Phone number 2/3: When you call the device by using these phone numbers, you will receive an SMS notification about location information. If you need to delete all authorized phone numbers, send 0000,A71. -
Page 12: Configuring Device Parameters By Meitrack Manager
For details about SMS commands, see the MEITRACK SMS Protocol. 5.4 Configuring Device Parameters by Meitrack Manager This section describes how to use Meitrack Manager to configure the device on a computer. For details about Meitrack Manager, see the MEITRACK Manager User Guide. - Page 13 Bluetooth beacon is powered on and starts to search information. Note: If the MAC code of the Bluetooth beacon fails to be found, set it by Meitrack Manager app. Set Bluetooth temperature and humidity sensor parameters.
-
Page 14: Logging In To Ms03 Tracking System
LED indicator is on for five seconds, which means the Bluetooth temperature and humidity sensor is powered on and starts to search information. Note: If the MAC code of the Bluetooth temperature and humidity sensor fails to be found, set it by Meitrack Manager app. -
Page 15: Obd Function
Note: Ensure that the device is firmly connected to the vehicle connector. If you have any questions, do not hesitate to email us at info@meitrack.com. Copyright © 2022 Meitrack Group All rights reserved.
Need help?
Do you have a question about the TC68E and is the answer not in the manual?
Questions and answers