Advertisement
1. Quick Start
1.1 Device Configuration
The device can be configured either by step 1.1.1 or 1.1.2. Please refer to the user manual of each model for
more details.
1.1.1 By SMS Commands
Model
Configuration
GT30i, GT60, VT300,
A. Set Tracker (GPRS) ID
VT310, VT400
SMS Command: W000000,010,S/N
Check the S/N barcode label from the device's case or PCB. This is the identification
number for the device in MS02 and it cannot be changed.
For example, if the S/N reads as 4037828853, the SMS command you need to send as
follows,
W000000,010, 4037828853
B. Set APN
SMS Command: W000000,011,APN,APN Username,APN password
Note: if no APN username and password required, leave them blank.
For example, if in China mainland using China Mobile's SIM card, the SMS command is as
follows:
W000000,011,CMNET
If in China mainland using China Union com's SIM card, the SMS command is as follows:
W000000,011,UNINET
C. Set IP Address and Port
SMS Command: W000000,012, IP address,Port
For example, if you use our sever, the SMS command is as follows:
W000000,012,67.203.13.26,8500
D. Enable GPRS
SMS Command: W000000,013,1
E. Set GPRS Interval
SMS Command: W000000,014,XXXXX
XXXXX should be in five digits and in unit of 10 seconds.
For example, if you want the tracker to report to the server every one minute, SMS
command is as follows:
Copyright © 2013 Meitrack Group All rights reserved.
File Name:
MEITRACK MS02 Quick Start
Project:
GPS Tracking System
Sub Project:
MS02
Revision:
V2.6
Creator:
Cavana Cheung
Creation Date:
Update Date:
Page:
Confidential:
External Documentation
2010-05-25
2013-06-27
- 3 - of 8
- 3 -
Advertisement
