Table of Contents
Advertisement
More SMS commands
You can configure the TC68S by mobile phone or by computer using PC tool Meitrack Manager.
For more details, please refer to part 4.5 Configure by Computer.
Note:
1. Password is 4 digits only and defaulted to 0000. You can change the password by Parameter Editor and SMS
command.
2. The
TC68S will only accept commands from a user with the correct password and report SMS report to the user.
If function phone number was set, only this phone number can receive SMS reports.
4.4.1 SOS– A71
This command is to set the SOS emergency communications number, call the phone number, inform the
location by SMS and other SMS additional features at the same time.
The content of Mobile Phone SMS:
0000,A71,Function Number 1, Function Number 2, Function Number 3 Sent to the embedded SIM card numbers
(tips: "," should be English comma and no space before and after the comma)
TC68S automatic reply SMS:
IMEI,A71,OK Prompts successful, successfully set SOS emergency communications number.
When you press the SOS emergency button, TC68S will dial 3 function phone numbers. It will stop dialing when
one number answers.
Note: the default value is empty. The function numbers should be added "," to avoid setting failure. The last
function number doesn't need a ",". For example:
0000,A71,13500000000,,
0000,A71,13500000000,13600000000,
0000,A71.13500000000,13600000000,13700000000
To clear the combination of functions directly sending 0000,A71
Copyright © 2014 Meitrack Group All rights reserved.
File Name
MEITRACK TC68S User Guide
Project
TC68S
Sub Project
User Guide
Revision
V1.2
Creator
Creation Date
Update Date
Page
Confidential
External Documentation
Renny Lee
2012-07-13
2014-02-26
9 of 16
-9-
Advertisement
Table of Contents
