Table of Contents
Advertisement
Operation
Using the DS-Tool
1. Start the DS-Tool, and click Install this driver software anyway.
2. Allow access to the DS-Tool on the Windows Firewall.
3. Once the utility opens, click the Broadcast button to detect the device server. The
default IP address of the device is 192.168.10.2.
4. Once detected, click the checkbox beside the device you would like to configure,
and then click the Add button to configure your desired IP settings (Static/DHCP).
Instruction Manual
5
Advertisement
Table of Contents
Need help?
Do you have a question about the NETRS232485 and is the answer not in the manual?