Table of Contents
Advertisement
Operation
For full operation instructions, please visit www.startech.com/NETRS232485W
1. Start the DS-Tool, allow the install of the driver
2. Allow access to the DS-Tool on the Windows Firewall
3. Once the utility opens, click the "Broadcast" button to detect the device server. The
default IP address of the device is "192.168.10.2".
4. Once detected, click the checkbox beside the device you would like to configure,
and then click the "Add" button to configure your desired IP settings (Static/DHCP).
Instruction Manual
5
Advertisement
Table of Contents
