1
Set up the following items.
Country/Region: Selects your country or region.
Country/Region Code: Enters your country code or
region code in the box. (e.g., enter "1" for the USA.)
Protocol: Selects the nework switch type. (This is only
for the USA and Canada.)
Country/Region:
Country/Region Code:
Protocol:
2
Select Next with the joystick on the Remote Commander,
then press the joystick.
The next wizard appears on the monitor screen.
Area Code
A1:
A2:
B1:
B2:
C1:
C2:
Auto SPID
Previous
3
Set up the following items.
Area Code: Enters your area code.Do not enter the first
zero number of your area code. (e.g., enter only "408"
for California.)
Local Number: Enters your telephone number and sub-
address (if you set your sub-address). Enter the asterisk
( ) after the telephone number, then enter the sub-
address. You cannot use the alphabet in a sub-address.
USA
1
Next
Cancel
Local Number
Next
Cancel
Chapter 1 Preparation
(Continued)
23