Sony PCS-1600 Operating Instructions Manual page 3

IMPORTANT INSTRUCTION TO
USERS
1. This equipment complies with Part
68 of the FCC Rules. On the bottom
of this equipment is a label that
contains, among other information,
the FCC registration number for this
equipment. If requested, this
information must be provided to the
telephone company.
2. If this terminal equipment causes
harm to the telephone network, the
telephone company will notify you
in advance that temporary
discontinuance of service may be
required. But if advance notice is
not practical, the telephone
company will notify the customer as
soon as possible. Also, you will be
advised of your right to file a
complaint with the FCC if you
believe it is necessary.
3. The telephone company may make
changes in its facilities, equipment,
operations or procedures that could
affect the operation of the
equipment. If this happens the
telephone company will provide
advance notice in order for you to
make necessary modifications to
maintain uninterrupted service.
4. If trouble is experienced with this
equipment for repair or warranty
information, please contact Sony
Business Information Center
800-686-7669. If the equipment is
causing harm to the telephone
network, the telephone company
may request that you disconnect this
equipment until the problem is
resolved.
5. This equipment cannot be used on
public coin phone service provided
by the telephone company.
Connection to party line service is
subject to state tariffs.
For the Customers in EU
countries
Hereby, Sony Corporation, declares
that this PCS-P160P is in compliance
with the essential requirements and
other relevant provisions of Directive
1999/5/EC.
The PCS-P160P is intended to be
connected to the ISDN using basic
rate access interface in accordance
with CTR 3 protocol.
This manual focuses on using
ISDN lines to conduct a
videoconference, but it also covers
non-ISDN lines. If you use ISDN
lines, consult your Sony dealer for
more information.
• The ISDN service may not be
available in some areas.
1-
3