Checking The Connection Status - Sony PCS-1600 Operating Instructions Manual

Checking the Connection Status

During a meeting, you can check the status of the
communication. Elapsed time also appears on the monitor
screen during a meeting.
1
2
Open the Communication Status menu.
Communication Status
Page: 1/2
Line I/F BRI
Line Rate 2 x 64K
(Encode) (Decode)
Auto Mode G.728 G.728
Video Mode H.261 H.261
CIF CIF
Frame Rate 15fps 15fps
Check the status:
Line I/F: Displays the line interface being used.
Line Rate: Displays the number of lines and the transfer
rate being used.
Far End Camera Control: Displays the far end camera
control protocol.
T.120 Data: Displays the data transmission protocol.
The items below are separately displayed in the columns
Encode and Decode.
The columns Encode indicate the status being sent, the
columns Decode indicate the status being received.
Audio Mode: Displays the audio encoding system.
Video Mode: Displays the video encoding system.
Frame Rate: Displays the maximum frame rate of the
motion picture.
LSD Rate: Displays the LSD (Low Speed Data) rate.
MLP Rate: Displays the MLP (Multi Layer Protocol) rate.
HMLP Rate: Displays the HMLP (High speed Multi
Layer Protocol) rate.
Chapter 2 Basic Operation During a Meeting
Far End
ON
Camera Control
T.120 Data OFF
(Encode) (Decode)
LSD Rate 6400 6400
MLP Rate OFF OFF
HMLP Rate OFF OFF
End
45