Starting a Point to Multi-Point Meeting
Notes on Point to Multi-Point Meetings
See also "The Attribute" on page 127.
• The chair control is only available from this terminal. Remote
• This system does not support multiplex MCU connections.
• The number of lines is set to two when Number of Lines is set
• One ISDN jack can connect with only one terminal. Even if
• This system does not support connections via the Inverse
120
Chapter 6 Meetings With the Upgrade Kit
parties cannot operate it.
to 2B; is set to one when set to 1B. This is regardless of the
setting in the Dial Setup menu.
you connect via 1B-channel, the number of remote parties is
up to three.
Multiplexer interface (BONDING).