Sending the Dial Tone to the Remote
Party
You can send the dial tone (Dual Tone Multi Frequency)
assigned to the 0 – 9, , and
Commander to control the remote system.
1
2
3
Press the
button on the Remote Commander.
The DTMF screen appears on the monitor screen.
Press one of the number buttons (0 – 9, , and
be sent to the remote system.
The dial tone will be sent to the remote system.
Press the joystick on the Remote Commander.
The DTMF screen disappears from the monitor screen.
Chapter 2 Basic Operation During a Meeting
buttons on the Remote
) that will
65