Table of Contents
Advertisement
3. Convenient Features
❶ Stopping projection
1. Press the SHUTTER button on the projector or on the remote
control.
The light source will turn off and the light of the projector will temporarily
go dark. The SHUTTER indicator will turn on in green.
Press the button again and projection will resume. The SHUTTER
indicator will turn off.
You can set the projection light to gradually fade in or fade out.
❷ Turning off the light source
1 Press the
(light source) button on the projector.
Hold the button for three seconds when the power is on to turn off the
light source directly (the cooling fan will also stop).The LIGHT indicator
will turn off.
• If the
(light source) button will be held down for three seconds
again, the LIGHT indicator will flash in green.
❸ Locking the projector so it cannot be operated
1 Press the KEY LOCK button for over 1 second on the projector.
The KEY LOCK indicator will turn on in orange and all the projector's
operating buttons will be locked.
• Press the KEY LOCK button for over 1 second again to turn off the
KEY LOCK indicator and unlock the buttons.
TIP:
• When [CONTROL PANEL LOCK] is engaged a " " icon appears in the lower right-hand corner of the menu screen.
• The projector can still be operated using the remote control even when the buttons on the unit are locked.
On the projector
SHUTTER indicator
28
On the remote
LIGHT indicator
Advertisement
Table of Contents
