Table of Contents
Advertisement
3. Convenient Features
❶ Turn off the light of the projector (LENS SHUTTER)
Press the SHUTTER/CALIBRATION button.
The light source will turn off temporarily.
Press again to allow the screen to become illuminated again.
• Another way to shut the light source off is to press the SHUTTER
button on the remote control.
• You can set the projection light to gradually fade in or out.
NOTE:
• [LENS SHUTTER] is functioned by quick press. If press and hold the SHUTTER/
CALIBRATION button over 2 seconds, it will start the LENS CALIBRATION.
❷ Turning off the Image (AV-MUTE)
Press the AV-MUTE button to turn off the image for a short period of time.
Press again to restore the image.
TIP:
• The video will disappear but not the menu display.
❸ Turning Off the On-Screen Menu (On-Screen Mute)
A press of the ON-SCREEN button on the remote control will hide the
on-screen menu, the source display and other messages. Press again
to restore them.
TIP:
• To confirm that the on-screen mute is turned on, press the MENU button. If the on-screen menu is not displayed even though
you press the MENU button, it means the on-screen mute is turned on.
• The on-screen mute is maintained even when the projector is turned off,
• Holding down the MENU button on the projector cabinet for at least 10 seconds will turn off the on-screen mute.
36
Advertisement
Table of Contents
