Table of Contents
Advertisement
⓫ Projecting 3D videos
This projector supports DLP-Link glasses and 3D emitter.
CAUTION
Health precautions
Before use, please make sure to read any health precautions that may be stated in the operating manuals enclosed
with the 3D eyewear and 3D video software (Blu-ray player, games, computer animation files, etc.).
Please take note of the following in order to avoid adverse health effects.
• Please do not use the 3D eyewear for purposes other than to watch 3D videos.
• Please keep a distance of at least 2 m away from the screen when watching videos. Watching a video too close
to the screen will increase eye fatigue.
• Please do not watch videos continuously for a long period of time. Please take a 15 minutes' break after every
hour of watching.
• Please consult a doctor before watching if you or any of your family members have a history of suffering from
seizures caused by light sensitivity.
• Please stop watching immediately and take a rest when you feel physically unwell while watching (vomiting, gid-
diness, nausea, headaches, sore eyes, blurred vision, cramps and dumbness in the limbs, etc.). Please consult
a doctor if the symptoms persist.
• Please watch a 3D video directly in front of the screen. If you watch a 3D video obliquely from the sides, this may
result in physical and eye fatigue.
Procedure to watch 3D videos using this projector
3D eyewear and 3D emitter preparations
Use an active shutter system 3D glasses conformed with VESA.
Recommend to use RF type glasses produced by Xpand
• 3D Glasses: Xpand X105-RF
• 3D Emitter: Xpand AD025-RF-X1
1. Connect the video device to the projector.
2. Switch on the projector.
3. Run the 3D video software and project the video using the projector.
[AUTOMATIC] is set as the factory default setting. When a 3D video cannot be projected, it may cause on no 3D
signal or the projector can not detect the 3D signal. In this case, select the format manually.
4. Select the 3D video format.
(1)Press the MENU button.
The MENU will be displayed.
(2)Press the ▶ button, select [ADJUST], then press ENTER.
[PICTURE] will be highlighted.
40
3. Convenient Features
Advertisement
Table of Contents
