Table of Contents
Advertisement
Turning On or Off Remote Sensor [REMOTE SENSOR]
This option determines which remote sensor on the projector is enabled in wireless mode.
The options are: FRONT/BACK, FRONT, BACK, and HDBaseT.
NOTE:
• The remote control of the projector will not be able to receive signals if the power supply of the HDBaseT transmission device
connected to the projector is switched on when this has been set to "HDBaseT".
TIP:
• If the remote control system does not function when direct sunlight or strong illumination strikes the remote control sensor of
the projector, change another option.
[LENS TYPE]
Depending on the lens installed on the projector, select either [WITH SENSOR] or [WITHOUT SENSOR].
[WITH SENSOR] .................For the lens units support the lens memory function
[WITHOUT SENSOR] ..........For the lens units do not support the lens memory function.
114
5. Using On-Screen Menu
Advertisement
Table of Contents
