Table of Contents
Advertisement
Using the Entry List
When you save [IMAGE OPTIONS] and [LENS MEMORY], the adjusted values of the signal are automatically saved to
the projector's [ENTRY LIST].When needed, the stored signal adjusted values can be accessed from the [ENTRY LIST].
However, only up to 100 patterns can be registered in the Entry List. When 100 patterns have been registered in the
Entry List, an error message is then displayed and no additional patterns can be registered. You should thus delete
(adjustment values of) signals that are no longer needed.
Displaying the Entry list
1. Press the MENU button.
The menu will be displayed.
2. Press the ◀ or ▶ button to select [INPUT].
The INPUT list will be displayed.
3. Use the ◀, ▶, ▲, or ▼ to select [ENTRY LIST] and press the ENTER button.
The ENTRY LIST windows will be displayed.
If the ENTRY LIST window is not displayed, switch the menu to [ADVANCED].
To switch the menu between [ADVANCED] and [BASIC], select [SETUP] → [CONTROL] → [TOOLS] → [ADMIN-
ISTRATOR MODE] → [MENU MODE]. (→ page 107)
77
5. Using On-Screen Menu
Advertisement
Table of Contents
