[Source Options] - NEC PH1202HL User Manual

[SOURCE OPTIONS]

Setting Auto Adjust [AUTO ADJUST]
This feature sets the Auto Adjust mode so that the computer signal can be automatically or manually adjusted for
noise and stability. You can automatically make adjustment in two ways: [NORMAL] and [FINE].
OFF ........................ The computer signal will not be automatically adjusted. You can manually optimize the computer signal.
NORMAL ................ Default setting. The computer signal will be automatically adjusted. Normally select this option.
FINE ....................... Select this option if fine adjustment is needed. It takes more time to switch to the source than when [NOR-
MAL]is selected.
TIP:
• The default setting when shipped from the factory is [NORMAL].
• When the AUTO ADJ. button is pressed, the same [FINE] adjustment is carried out.
[COLOR SYSTEM]
This feature allows you to select the TV video signal, which differs from country to country (NTSC, PAL, etc.).
This is set to [AUTO] by factory default. Set this if the projector cannot identify the signal automatically.
Selecting Default Source [DEFAULT INPUT SELECT]
You can set the projector to default to any one of its inputs each time the projector is turned on.
LAST ...................... Set the projector to default to the previous or last active input each time the projector is turned on.
AUTO ..................... Search for an active source in order of HDMI → DisplayPort → BNC → BNC(CV) → BNC(Y/C) → COMPUTER
→ HDBaseT → SLOT and displays the first found source.
HDMI ..................... Display the digital source from the HDMI IN terminal every time the projector is turned on.
DisplayPort ............ Display the digital source from the DisplayPort IN terminal every time the projector is turned on.
BNC ....................... Project the input signal from the BNC input terminal
BNC(CV) ................ Project the input signal from the BNC(CV) input terminal.
BNC(Y/C) ............... Project the input signal from the BNC(Y/C) input terminal.
COMPUTER ........... Display the computer signal from the COMPUTER IN terminal every time the projector is turned on.
HDBaseT ................ Project the HDBaseT or WIRED LAN signal.
SLOT ...................... Project the picture via the optional board (sold separately) inserted into the SLOT.
120
5. Using On-Screen Menu