Table of Contents
Advertisement
NETWORK SERVICE
HTTP SERVER
PJLink
AMX BEACON
CRESTRON
TIP: The CRESTRON settings are required only for use with CRESTRON ROOMVIEW.
For more information, visit
Set a password for your HTTP server.
This option allows you to set a password when you use the
PJLink feature.
NOTE:
• Do not forget your password. However, if you forget your password,
consult with your dealer.
• What is PJLink?
PJLink is a standardization of protocol used for controlling projectors
of different manufacturers. This standard protocol is established by
Japan Business Machine and Information System Industries Associa-
tion (JBMIA) in 2005.
The projector supports all the commands of PJLink Class 1.
• Setting of PJLink will not be affected even when [RESET] is done from
the menu.
Turn on or off for detection from AMX Device Discovery when
connecting to the network supported by AMX's NetLinx control
system.
TIP:
When using a device that supports AMX Device Discovery, all AMX NetLinx
control system will recognize the device and download the appropriate
Device Discovery Module from an AMX server.
Placing a checkmark will enable detecting the projector from AMX Device
Discovery.
Clearing a checkmark will disable detecting the projector from AMX
Device Discovery.
ROOMVIEW: Turn on or off when controlling the projector from
your PC.
CRESTRON CONTROL: Turn on or off when controlling the
projector from your controller.
• CONTROLLER IP ADDRESS: Enter your IP address of CREST-
RON SERVER.
• IP ID: Enter your IP ID of CRESTRON SERVER.
http://www.crestron.com
119
5. Using On-Screen Menu
Up to 10 alphanumeric
characters
Up to 32 alphanumeric
characters
—
Up to 12 numeric
characters
Advertisement
Table of Contents
