Table of Contents
Advertisement
(4)Turn the fine grade filter so it is facing upward, set the
cutout portion of the medium grade filter inside the filter
cover along the direction indicated by the tabs, and slowly
slide the filter in.
(5)Lock the lever, and insert it into the lock slot on the fine
grade filter.
6. Fix the filter inside the projector unit.
(1)Snap the filter cover tabs into the cutout portion of the
projector unit to secure it.
(2)Turn the knob to the right to fix it in place.
Clean the other intake vent air filters in the same way.
NOTE:
• Before turning on the powermake sure that all filter covers are in place. If they are not fitted properly dust could get inside the
projector causing it to malfunction.
• Reset [FILTER HOURS USED] after cleaning the filters. To reset go to the on screen menu and select [SETUP] → [RESET] →
[CLEAR FILTER HOURS]. (→ page 124)
1
145
7. Maintenance
Cutout portion
Direction tabs
Lock slot
2
Advertisement
Table of Contents
