Table of Contents
Advertisement
❼ Troubleshooting
This section helps you resolve problems you may encounter while setting up or using the projector.
Indicator Messages
POWER Indicator
Indicator display
Off
Flashing
Blue (short flashes)
Blue (long flashes)
Orange (short flashes)
Orange (long flashes)
Lit
Blue
Red
Orange
STATUS Indicator
Indicator display
Off
Flashing
Red (once per
cycle)
Red (3 times
per cycle)
Red (4 times
per cycle)
Red (6 times
per cycle)
Red (9 times
per cycle)
Lit
Green
Orange
* Sleep mode refers to the state whereby the functional restrictions due to the standby mode setting are removed.
Projector status
Power is off.
Preparing to turn power on
Off timer (enabled)
Program timer (off time enabled)
Projector cooling
Program timer (on time enabled)
Power on
Standby mode (NORMAL)
Standby mode (HDBaseT STANDBY)
Projector status
No problem, or STAND-
BY MODE - "HDBaseT
STANDBY"
Problem with the cover
Power failure
Problem with the fan
Problem with the light
source
Hardware problem
STANDBY MODE in
sleep mode*
Button has been
pressed while projector
is in key lock mode
Projector's ID number
and remote control's ID
number do not match
–
Check to make sure the front cover, top cover, side cover,
and lens unit are all correctly fixed in place.
Problem with the power system. Contact the NEC projector
customer support center to arrange for repair.
Rotation of the cooling fan has stopped. Contact the NEC
projector customer support center to arrange for repair.
Problem with the light source system. Contact the NEC
projector customer support center to arrange for repair.
Problem with the hardware. Contact the NEC projector
customer support center to arrange for repair.
–
The projector's keys are locked. The setting must be can-
celed to operate the projector. (→ Page 28, 112)
Check the control IDs. (→ Pages 113)
175
9. Appendix
Procedure
–
Wait a while.
–
Wait a while.
–
–
–
–
Procedure
Advertisement
Table of Contents
