Error Codes Returned By Apm Sub-Functions - EUROCOM 6X00 Service Manual

Error Codes returned by APM sub-functions

errPM_Disabled
errInterf_Present
errInterf_Not_Present
errPM16_Est
errPM16_Unsupported
errPM32_Est
errPM32_Unsupported
errUnrec_Device_ID
errCX_Parm_OOR EQU
errInterf_Not_Engaged
errCant_Enter_State
errNo_PM_Pending EQU
errAPM_Not_Present
errUnsupported_APM_Fn EQU
errPM_already_enabled
errPM_already_disabled
errPM_function_not_supp
DIAG
APM_INST
APM_INTF_CONNECT
APM_PM16_CON EQU 0D2h
APM_PM32_CON EQU 0D3h
APM_INTF_DISCON
APM_CPUIDLE
APM_CPUBUSY
APM_POWER
APM_EN_DIS_PM EQU 0D8h
APM_DEFAULTS
APM_GET_STATUS
APM_HAVE_EVENT
APM_EVENT_CALL EQU 0DCh
APM_TRIGGER
SMI_TRIGGER
APM_GET_PM_ENABLE EQU 0DEH
EQU 01H ;PM functionality is disabled
EQU 02H ;Interface already present
EQU 03H ;Interface disconnected or not est.
EQU 05H ;Prot. Mode 16-bit already est.
EQU 06H ;Prot. Mode 16-bit unsupported
EQU 07H ;Prot. Mode 32-bit already est.
EQU 08H ;Prot. Mode 32-bit unsupported
EQU 09H ;Unrecognized Device ID
0AH ;CX Parameter out of range
EQU 0BH ;Interface not engaged (APM 1.1)
EQU 60H ;Can not enter requested state
80H ;No PM Events pending
EQU 86H ;Advanced Power Management not present
0FFH ;SystemSoft internal define
EQU 30h ; PM is already enabled
EQU 31h ; PM is already disabled
EQU 32h ; PM function not supported
EQU 1
EQU 0D0h
EQU 0D1h
EQU 0D4h
EQU 0D5h
EQU 0D6h
EQU 0D7h
EQU 0D9h
EQU 0DAh
EQU 0DBh
EQU 0DDh
EQU 0DDh
56