1. Manuals
  2. Brands
  3. EUROCOM Manuals
  4. Laptop
  5. 6100t
  6. User manual

EUROCOM 6100t User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Notice
Updating or revising this manual or making any changes to the information herein
will be initiated when the company deems it necessary. The company reserves the
right to take the above-mentioned actions and is under no obligation to notify any
person of such actions in advance or afterwards.
1997
Trademark
MS-DOS, Microsoft Windows, Windows NT and Microsoft Mouse are registered
trademarks of Microsoft Corporation.
IBM PC, OS/2, PS/2, EGA, and VGA are registered trademarks of International
Business Machines Corporation.
Intel, Pentium are trademarks of Intel Corporation.
AMI is a trademark of American Megatrends, Inc.
Other brand and product names are trademarks of their respective companies.

Warranty Provisions

Warranties for the Notebook Computer may vary with different areas. If you have any
questions, please call your local dealer with the serial number of your unit, and you
will be provided with all warranty information you need.
The manufacturer is not liable to any purchaser for damage, lost revenue, lost wages,
lost savings, or any other incidental or consequential damages arising from the
purchase or use of the product or inability to use the product.
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 6100t and is the answer not in the manual?

Questions and answers

Related Manuals for EUROCOM 6100t

Summary of Contents for EUROCOM 6100t

  • Page 1: Warranty Provisions

    Notice Updating or revising this manual or making any changes to the information herein will be initiated when the company deems it necessary. The company reserves the right to take the above-mentioned actions and is under no obligation to notify any person of such actions in advance or afterwards.

  • Page 2: Fcc Notice

    FCC Notice This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

  • Page 3: Important Safety Instructions

    Important Safety Instructions Please read and follow these important instructions. 1. Follow all warnings and instructions marked on this product. 2. Unplug this product from the wall outlet before cleaning it or connecting peripheral devices. 3. Use a damp cloth with mild soap to clean this product. Do not apply cleaner directly to the unit.

  • Page 4: Table Of Contents

    Table of Contents Chapter 1 Getting Started Unpacking......................7 Operating Environment..................8 System Features ....................9 Quick Starting-Up....................11 Powering the System................... 11 Opening the LCD Cover................12 Portable Operation..................13 Primary battery Pack................13 Secondary Battery Pack............... 14 Charging Battery Packs ............... 15 DURACELL®...
  • Page 5 Rear View ......................25 AC-in Socket....................25 Serial Port (COM2)..................25 MIDI/Game Port ..................25 External Monitor (CRT) Port............... 25 Serial Port (COM1)..................25 Parallel Port....................25 PS/2 Type Port................... 25 Chapter 2 Operating Upgrading CPU....................28 Replacing CPU................... 28 ZIF Socket Operation ..................
  • Page 6 Peripheral Setup..................52 Security ...................... 54 Utility ......................56 Default....................... 57 Exit ......................58 0V Suspend Utility....................59...

  • Page 7: Chapter 1 Getting Started

    Chapter 1: Getting Started This chapter provides a short introduction and tutorial that will familiarize you with the Notebook system and get you up and running quickly. Unpacking Carefully unpack the Notebook Computer and its included accessories. If there are any discrepancies or problems, contact your dealer immediately.

  • Page 8: Operating Environment

    Operating Environment Thanks to the Notebook’s ability to run on battery power, its compactness in size, and light weight, it can be conveniently operated wherever the temperature and humidity are comfortable enough for you to work. If you properly care for the Notebook, it will provide many years of reliable service. However, remember this computer system is a precision instrument and it should not l Exposed to excessive heat or direct sunlight.

  • Page 9: System Features

    System Features The Notebook Computer is a state-of-the-art, high performance, portable system. It offers a host of features specially designed to enhance performance and usability. l CPU ü Intel P54C. ü Intel P54LM. ü Intel P55C with MMX technology. l Memory ü...
  • Page 10 l PC Card Sockets ü One Type III or two Type II PC cards. l Mass Storage ü 2.5” (12.7mm high or less) hard disk drive. ü 3.5” floppy disk drive (interchangeable). ü 5.25” CD-ROM. l Infrared Wireless Communication ü IrDA (HPSIR). ü...

  • Page 11: Quick Starting-Up

    Quick Starting-Up Powering the System Use only the Power Adapter that comes with your Computer. System operation with an incorrect power adapter will cause damage to the Notebook and its components. 1. Connect the power cord to the power adapter. 2.

  • Page 12: Opening The Lcd Cover

    Opening the LCD Cover 1. Slide the top cover latch to the right to release the latch. 2. Lift the top cover to reveal the LCD panel and keyboard. 3. Raise the LCD panel to a comfortable viewing angle. 4. Press the power button once to turn the system on, once to turn it off.

  • Page 13: Portable Operation

    Portable Operating Primary Battery Pack The Notebook system can be powered by battery pack for continuous portable operation without an external power source when you take it away from the office. The actual operating time, however, will be dependent upon the application you use and the configuration you set.

  • Page 14: Secondary Battery Pack

    Secondary Battery Pack (Option) When you need prolonged use without the availability of the AC adapter, you may consider a spare battery, called Secondary Battery Pack, for optimal portable operation. Insert the battery pack into the proprietary bracket to have your system powerful.

  • Page 15: Charging Battery Packs

    Charging Battery Packs Off-Line Charge The Notebook system is powered off. Connect the AC adapter to the unit. Its DC output will be used solely to charge the battery. It will take hours to bring a completely discharged battery to its full charge state. Trickle Charge The Notebook system is powered on.

  • Page 17: Top-Front View

    Top-Front View A. LCD Panel The LCD display is SVGA (800x600 pixels) compatible and driven by a PCI local bus video controller with 2MB video memory providing high performance and crystal clear resolution. It measures 11.3”/12.1” diagonally either with Thin Film Transistor (TFT) technology or 12.1”...

  • Page 19: Leds, Power Switch, And Microphone

    LEDs, Power and Microphone Icon Color of Light Description Green System power on (either by AC or by battery) Battery in charge when system power off Orange Battery in charge when system power on Green Primary battery fully charged Secondary battery fully charged Orange Both batteries fully charged Icon...

  • Page 20: System Status Lcd Bar

    System Status LCD Bar Icon Description AC power is used. Battery power is critically low. CD-ROM is accessing. Floppy Disk Drive is accessing. Hard Disk Drive is accessing. The system has entered the 5V-Suspend mode. The CPU is running at the maximum speed. Scroll lock function is activated.

  • Page 21: Right Side View

    Right Side View A. PC Card Sockets One Type III or two Type II PC cards may be used. The ejection button for the upper slot is located on the left. The eject button for the lower slot is on the right. Both sockets will expand the system capabilities when a PC card is inserted.

  • Page 23: Left Side View

    Left Side View A. 2.5” Removable Hard Disk Drive This compartment houses a removable 2.5” hard disk drive. To replace the hard disk, open the cover then pull out the hard disk gently. B. 3.5” Floppy Disk Drive The Notebook comes standard with a 1.44MB floppy drive installed. You may press the button on its top-right side for diskette ejection.

  • Page 25: Rear View

    Rear View A. AC-in Socket Plug the AC adapter into this connector for power supply. To disconnect the power adapter, pull the plug (not the cord) directly back. B. Serial Port (COM2) This RS232 port is UART 16C550 compatible. It is defined as COM2. C.

  • Page 27: Chapter 2 Operating

    Chapter 2: Operating The Notebook has many advanced features to help you with your computing work. This Chapter describes each of the Notebook’s hardware features and show you how to use them. Before you begin working with any internal components of the Notebook, removal all batteries and disconnect the AC power adapter.

  • Page 28: Upgrading Cpu

    Upgrading CPU The system is capable of hosting a wide range of Intel CPUs’ speed. Upgrading your CPU will increase your computing speed. Different CPUs may have different power voltages. The Notebook comes standard with 3.3 volt CPU. If you upgrade CPU at other power voltage than 3.3V, contact your dealer to obtain the CPU Power Module to set the required power voltage.
  • Page 29 The back side of heat sink (Washer for AMD K6 only) Washer Thermal Pad Heat Sink Set for CPU power CPU Power Module Set for CPU speed...

  • Page 30: Zif Socket Operation

    ZIF Socket Operation A ZIF (Zero Insertion Force) socket is provided to facilitate CPU removal and installation for you. You may need to contact your dealer for the proprietary tool to work with the ZIF socket. Improper tool or incorrect operation may damage the socket.

  • Page 31: Updating Bios

    Updating BIOS In order to keep up with the latest system BIOS, you may upgrade your Notebook system from available source, your dealer for example. Continue the process that you work with CPU processors. The DIP Switch SW2-1 and SW2-2 need to be set ON when you are going to update the existing system BIOS.

  • Page 32: Expanding Memory

    Expanding Memory The system has two memory sockets for different RAM Modules to expand the memory up to 128MB. These RAM Modules are 144-pin SODIMM (Small Outline Dual In-line Memory Module) type. The Notebook supports Fast Page Mode, EDO operation. With the following memory configurations, the total memory size will be automatically detected by the POST routines: Bank 0 (64-bit) Bank 1 (64-bit) Power...
  • Page 33 Bank 0 Bank 1...

  • Page 34: Using Hot Keys

    Using Hot Keys Located on the bottom-left edge of the keyboard layout is a colored Fn key. It is a special key only found on the Notebook to make key combination with other keys for easy access to system features. Hold down the Fn key while pressing other key as below: Hot Keys System Features...

  • Page 35: Using Pc Card Sockets

    Using PC Card Sockets The Notebook provides system expanding capabilities with two PC card sockets (previously referred to as PCMCIA) by inserting various PC cards. Both sockets supports 5V/3.3V 16-bit PC cards. The PC cards may be LAN, fax/modem, communication devices, or expanded memory.
  • Page 36 l To remove a PC card, press the appropriate eject button and the card will be ejected from its slot. Socket A Socket B Eject Button for Socket A Eject Button for Socket B...

  • Page 37: Replacing Hard Disk Drive

    Replacing Hard Disk Drive The hard disk drive of the Notebook can be removed since it is mounted on a removable tray. The tray can house any 2.5” IDE hard disk drive with a height of 12.7mm. The system BIOS supports drives with capacities greater than 528MB through the Logical Block Addressing (LBA) mode.

  • Page 39: Replacing Floppy Disk Drive

    Using Floppy Disk Drive The Notebook comes standard with a 1.44”MB, 3.5” floppy disk module. It is labeled drive A: and may be used as a boot drive if properly set. The compartment that the floppy disk currently resides may get exchangeable with the option: Secondary Battery Pack, described in Chapter One.

  • Page 40: Using Cd-Rom

    Using CD-ROM The Notebook comes standard with a 5.25” CD-ROM that is internally mounted. It is labeled drive D: and may be used as a boot drive if properly set. Do not disassemble the CD-ROM from the Notebook. Only certified technicians should perform repairs to the CD-ROM.

  • Page 41: Using Embedded Numeric Keypad

    Using Numeric Keypad The colored keys in the middle section of the keyboard will function as a Numeric Keypad. Follow these steps to access the Numeric Keypad: l Press the NumLock key to lock the Numeric Keypad. l Notice if the NumLock LED indicator in green light. l Press the Fn key along with the specified keys to operate the Numeric Keypad.

  • Page 42: Using Power Management

    Using Power Management The Notebook system provides you with various modes to manage its power consumption while maintaining system performance. Refer to Chapter 3: WINBIOS Setup on how to set the options. Doze Doze mode is the state in which the CPU is fully alive and operational, yet running at a speed that is greatly reduced in order to save power.

  • Page 43: Chapter 3 Bios Utilities

    Chapter 3: BIOS Utilities Power On Self Test (POST) The system BIOS (Basic Input/Output System) performs a series of Power On Self Test (POST) on system memory and key computer components every time the computer is powered on. If an error exists, the POST routine may halt execution (depending on the severity of the problem).

  • Page 44: Winbios Setup

    WINBIOS Setup WINBIOS Setup configures system parameter settings that are stored in non-volatile battery-backed CMOS RAM. The information will be saved even when the power is turned off, and retains that when the system is turned back on. WINBIOS provides you with graphical user interface for easy access.

  • Page 45: Working With Winbios Setup

    Working with WINBIOS Setup The WINBIOS Setup has four windows; Setup, Utilities, Security, and Default. Each window contains several icons. To activate a specific function, click on the corresponding icon. WINBIOS Window Main Menu Description Sets the time and date, configures Standard disk drives.

  • Page 46: Help

    Help Press key combination Alt + H to pop up the on-line Help window. Use the trackpad pointing device to access the WINBIOS Setup or use the specific key defined as below: Keystroke Function Moves to the next window or field. Enter Selects in the current field.

  • Page 47: Standard Setup

    Standard Setup Click on an icon to set the parameters. Pri Master Sec Master Type: Not Installed, 1∼46, User, Auto, CDROM, Floptical. LBA/Large Mode: Off, On. Block Mode: Off, On. 32Bit Mode: Off, On. PIO Mode: Auto, 0, 1, 2, 3, 4, 5. Enters the current date and time: Day/Month/Year;...

  • Page 48: Advanced Setup

    Advanced Setup Set Yes if the operating system is Plug & Play-aware. Plug and Play Aware O/S Set No if the OS is not PnP-aware. Set the first boot drive. The settings are Disabled, Boot Device IDE-0, Floppy, CDROM. Set the second boot drive. The settings are Disabled, Boot Device IDE-0, Floppy, or CDROM.

  • Page 50: Power Management Setup

    Power Management Setup Set the CPU clock state when the CPU enters Auto DOZE Mode CPU Clock DOZE Mode. The settings are Disabled, CPU∗ 3/4, CPU/2, CPU/4, CPU/8, or CPU/16. Specify the length of a period of system Auto DOZE Mode Time Out inactivity.
  • Page 51 If there is no display activity for a specified Monitor Video for Suspend period of time, the system enters Suspend Mode. The settings are No or Yes. Specify the length of a period of video Display Idle Time Out inactivity. When the timer expires, the LCD display will be put on standby mode.

  • Page 52: Peripheral Setup

    Peripheral Setup Enable the parallel port and specify the base I/O OnBoard Parallel Port port address. The settings are Disabled, 378h, 278h, or 3BCh. Specify the parallel port mode. The settings are Parallel Port Mode Normal, EPP (Enhanced Parallel Port), or ECP (Extended Capabilities Port).
  • Page 53 Specify the first audio DMA channel. The Audio DMA Channel settings are DMA #0, DMA#1, DM A#3. Specify the second audio DMA channel. The Audio DMA Channel settings are Disabled, DMA #0, DMA#1, DMA#3. Select an IRQ signal. The settings are Disabled, IRQ Select IRQ5, 7, 9, 10, 11.

  • Page 54: Security

    Security Enter a supervisor password up to 6 characters every time the Supervisor system is booted or when WINBIOS Setup is accessed. You may either type the password on the keyboard, or select letters using the mouse. The password does not appear on the screen when typed.
  • Page 55 Enter a user password up to 6 characters every time the User system is booted or when WINBIOS Setup is accessed. Prior setting of supervisor password is required.

  • Page 56: Utility

    Utility Select the IDE Detection icon to automatically detect all drive Detect IDE parameters: Type, Cyl (number of cylinders), Hd (number of heads), WP (Starting write precompensation cylinder), Sec (number of sectors), Size (drive capacity). Click on PIO Mode to select the IDE programmed I/O mode among the settings Auto, 0, 1, 2, 3, 4, 5.

  • Page 57: Default

    Default Restore the current setup settings to the old values. Original Load the optimal values for best system performance. Optimal...

  • Page 58: Exit

    Exit Click the Close button in the upper-left corner of the window to close the WINBIOS Setup. You can also follow the Help instruction to exit the WINBIOS by pressing Esc key.

  • Page 59: Suspend Utility

    Utility 0V Suspend (HDPREPEZ.EXE) The utility HDPREPEZ.EXE is used to create the 0V-Suspend partition or DOS FAT- compatible file reserved for storing the system state during a 0 Volt suspend mode. Insert the 0V-Suspend Utility in the appropriate drive, for example Drive A:, to create a configuration file named HDPREP.CFG.

Table of Contents