Aimer Interval - Hand Held Products IMAGETEAM 4400 User Manual

Aimer Interval

Aimer Interval turns off the aiming light, or programs the aimer to come on at
certain intervals when reading symbols with the scanner. You may program the
scanner to use the aimer Every Read, Every Second Read, or Every Third Read.
You may also program the scanner to use the aimer every "x" reads, by entering
a number from 0 to 999 to indicate "x."
Off
Every Second Read
‡ A one- to three digit number and Save are required after reading this
programming symbol. Refer to the Programming Chart (inside back
cover).
Every "x" Reads ‡
* Every Read
Every Third Read
2 - 19