6
Quick*View
Quick*View Demonstration Software Instructions
Quick*View is a Microsoft Windows program that displays decoded symbol
messages and captures images (for instance, ID photographs) from the
IMAGETEAM 4400/4700 Imager. Bar code information and images are
displayed in the Quick*View window.
Setting Up the Imager and the Quick*View Software
1. Connect the Imager to the PC's com port (com port 1 or com port 2) via the
appropriate interface cable.Connect the appropriate power supply to the
Imager. (The Imager cannot get its power from the PC's com port.)
For Microsoft Windows 95 or NT 4.0
2. Insert the Quick*View diskette labelled "32 Bit Release" into Drive A or B.
3. From the Start Menu, click on Run. Type "x:\setup" in the command line
box, where "x" represents a drive letter, typically "A" for the 3.5" floppy drive
on most PCs. Click on OK.
4. Follow the instructions in the setup screens.
5. To start the Quick*View program, from the Start Menu click on Programs,
Quickview, QuickView (32 Bit).
For Microsoft Windows 3.1
2. Insert the Quick*View diskette labelled "16 Bit Release" into Drive A or B.
3. Copy the QV16.EXE file to your PC hard drive.
4. From the Program Manager, File Menu, Run the QV16.EXE file.
6 - 1