Zoom Placement - Hand Held Products IMAGETEAM 4400 User Manual

Zoom Placement

This lets you position the read area (crosshairs) of the Imager when it is in zoom
mode. The Zoom Vertical moves the crosshairs vertically, and the Zoom
Horizontal move them horizontally, as illustrated below:
Note: When zoom is turned on, the field of view of the Imager is reduced, making
it more difficult for the Imager to read large matrix symbols.
After the Zoom Placement code below is scanned, you must scan a 1 digit code
(inside back cover) to enter the zoom position you want. The default for both
vertical and horizontal placement is 4, which centers the crosshairs in the field of
view.
Zoom Vertical
Note: The default setting for the HD Imager is a Zoom Vertical of 6 and, for the
HD10, the default setting is a Zoom Vertical of 5.
Zoom Horizontal
3 4 5 6
3
4
5
6
Zoom Horizontal
2 - 23