Visual Menu Introduction - Hand Held Products IMAGETEAM 4400 User Manual

7
Visual Menu

Visual Menu Introduction

Visual Menu provides the ability to configure a scanning device by connecting
the scanner to the com port of a PC. Visual Menu allows you to download
upgrades to a scanner's firmware, change programmed parameters, and create
and print programming bar codes. Using Visual Menu, you can even set up the
configuration for a scanner which is not attached to your PC. This enables one
expert user to establish the configuration settings for all the devices your
company uses, then save these configuration files for others. A configuration file
can be e-mailed or, if you prefer, an expert user can create a bar code (or series
of bar codes) which contains all the customized programming parameters, and
mail or fax the bar code(s) to any location. Users in other locations can scan the
bar code(s) to load in the customized parameters.
To communicate with a scanner, Visual Menu requires that the PC have at least
one available serial communication port and an RS-232 cable to connect the port
to the device. A power supply, which plugs into the cable, is also required.
Visual Menu Operations
The Visual Menu program performs the following operations:
• Displays all configuration data, and saves the information to a file on your
PC.
• Configures the device to meet your specific requirements. Visual Menu
has all the programming parameters which are available via programming
bar codes in this User's Guide.
• Creates and prints a clone bar code which contains the program and
configuration data from one device. This bar code can then be used to
program additional devices with the same parameters.
• Selects a device from a list, then performs offline or online file
configuration for that device.
7 - 1