Two screws
Removing the diode and warmer element
terminal cover:
1. Disconnect power and remove the three screws
holding the cover to the rear of the range.
Three screws
Removing the warmer drawer diode:
1. Disconnect power and remove the diode cover.
2. Cut the wires to the diode and splice in the
replacement diode.
Removing the warmer drawer cavity:
1. Disconnect power, remove the warmer drawer and
disconnect the wires from the element and
thermostat.
2. Remove the bodysides and the four screws, two on
each side one in the front and one in the rear, that
hold the warmer drawer cavity to frame of the range.
Pull the warmer drawer cavity out the front of the
range.
117
Diode
Front screw
Rear screw