Bodyside - Electrolux 30" Service Manual

Disconnect wiring
2. From inside the small oven remove the two screws
holding the circuit breaker to the rear wall and slide
the circuit breaker out the back of the range.
Two screws
Removing the righthand bodyside:
1. Disconnect power remove the large oven door and
storage drawer.
2. Remove the rear panel from backguard and the large
rear panel. Remove the remaining seven screws
holding the back flange of the bodyside to the range.
Seven screws
3. Remove the one screw holding the bottom rear brace
to the bottom inside flange of the bodyside.
One screw
4. Remove the two screws holding the top to the
hinges and lift top up and forward. Remove the one
screw holding the hinge to the bodyside.
One screw
5. Raise the main top and remove the two screws from
the front corner holding the bodyside to the front
frame.
Two screws
6. Remove the storage drawer glide by removing one
screw and sliding the glide forward.
136