SPRING PIN
FIGURE 5
STEP 5:
• Pull back on the SPRING PIN and slide the ADJUSTABLE SEAT (12) over the BENCH FRAME (2) as shown in FIGURE 5.
78
FIGURE 6
STEP 6:
• LOOSELY assemble the BENCH FRAME (2) to the UPRIGHT SUPPORT (6) and the BASE (1) using eight RH CAPS (78), two
3/8 X 3-1/2" BOLTS (63), two 3/8 X 4" BOLTS (53), eight 3/8" SAE WASHERS (75), eight 3/8" RH WASHERS (76) and four
3/8" LOW HEIGHT LOCK NUTS (73) as shown in FIGURE 6.
12
76
75
53 3/8 X 4" (97m)
8
2
6
73
1
2
3/8 X 3-1/2" (90m) 63