Life Fitness Fit-1 Assembly Instructions Manual page 13

76
75
3/8 X 3" (73m) 65
BLACK 77
FIGURE 14
STEP 14:
• SECURELY assemble the BACK PAD (43) to the BACK PAD SUPPORT (15) using two BLACK RH CAPS (77), two 3/8 X 3"
BOLTS (65), two 3/8" SAE WASHERS (75) and two 3/8" RH WASHERS (76) as shown in FIGURE 14.
FIGURE 15
STEP 15:
• Assemble two 5 x 8" ROLLER PADS (39) and four 2-3/8" OD PLASTIC WASHERS (32) to the UPRIGHT SUPPORT (6) using
two 1-1/4" SHAFT COLLARS (51) and one 21-1/2" ROLLER PAD TUBE (19) as shown in FIGURE 15.
• Once the 5 X 8" ROLLER PADS (39) are assembled to the UPRIGHT SUPPORT (6), SECURE the 21-1/2" ROLLER PAD
TUBE (19) with the two 5/16 x 1/4" SET SCREWS.
1/2
0
10
1 2
1/2
20 30 40 50
43
15
19
6
3
1/2 1/2
60 70 80 90
13
39
4 5
1/2
100 110 120 130
51
32
6
1/2
140 150