Pulley Guard 1 - Life Fitness Fit-1 Assembly Instructions Manual

22
3/8 X 1-3/4"
(43m) 62
78
FIGURE 30
STEP 30:
• Route the LEG CABLE (45) through the SWIVEL (14) and assemble two 4-1/2" PULLEYS (38) to the SWIVEL (14) using four
BLACK RH CAPS (77), two 3/8 X 1-3/4" BOLTS (62), four 3/8" SAE WASHERS (75), four 3/8" RH WASHERS (76) and two
3/8" LOW HEIGHT LOCK NUTS (73) as shown in FIGURE 30.
• Route the LEG CABLE (45) around one 4-1/2" PULLEY (38) and assemble the PULLEY (38) and the PULLEY GUARD (22)to
the PIVOT ARM (9) using two RH CAPS (78), one 3/8 X 1-3/4" BOLT (62), two 3/8" SAE WASHERS (75), two 3/8" RH
WASHERS (76) and one 3/8" LOW HEIGHT LOCK NUT (73) as shown in FIGURE 30.
38
1
3/8 62
76
X 1-3/4"
(43 m)
78
75
FIGURE 31
STEP 31:
• Route the LEG CABLE (45) around a 4-1/2" PULLEY (38) and assemble it to the bracket on the BASE (1) using four RH CAPS
(78), two 3/8 X 1-3/4" BOLTS (62), four 3/8" SAE WASHERS (75), four 3/8" RH WASHERS (76) and two 3/8" LOW HEIGHT
LOCK NUTS (73) as shown in FIGURE 31.
73
73
78
9
38
76
75
77
BLACK
14
45
45
21
62 3/8 X 1-3/4" (43m)