Life Fitness Fit-1 Assembly Instructions Manual page 12

BLACK 77
69 3/8 X 6-1/2" (164m)
FIGURE 12
STEP 12:
• SECURELY assemble the BACK PAD SUPPORT (15) to the ADJUSTABLE SEAT (12) using two BLACK RH CAPS (77), one
3/8 X 4-1/4" BOLT (67), two 3/8" SAE WASHERS (75), two 3/8" RH WASHERS (76) and one 3/8" LOW HEIGHT LOCK NUT
(73) as shown in FIGURE 12.
• SECURELY assemble the BACK PAD SUPPORT (15) to the UPRIGHT SUPPORT (6) using two BACK PAD ADJUST PLATES
(17), four BLACK RH CAPS (77), two 3/8 X 6-1/2" BOLTS (69), four 3/8" SAE WASHERS (75), four 3/8" RH WASHERS
(76) and two 3/8" LOW HEIGHT LOCK NUTS (73) as shown in FIGURE 12.
FIGURE 13
STEP 13:
• SECURELY assemble the SEAT PAD (42) to the SEAT SUPPORT (11) using three BLACK RH CAPS (77), three 3/8 X 1-1/4"
BOLTS (61), three 3/8" SAE WASHERS (75) and three 3/8" RH WASHERS (76) as shown in FIGURE 13.
6
76
75
67 3/8 X 4-1/4" (106m)
76
75
3/8 X 1-1/4" (32m) 61
15
12
17
77 BLACK
12
73
42
11