Life Fitness Fit-1 Assembly Instructions Manual page 23

38
76
75
78
62 3/8 X 1-3/4" (43m)
FIGURE 33
STEP 33:
• Route the LEG CABLE (45) through the bracket on the BASE (1) and assemble one 4-1/2" PULLEY (38) to the bracket on the
BASE (1) using four RH CAPS (78), two 3/8 X 1-3/4" BOLTS (62), four 3/8" SAE WASHERS (75), four 3/8" RH WASHERS (76)
and two 3/8" LOW HEIGHT LOCK NUTS (73) as shown in FIGURE 33.
• Route the LEG CABLE (45) through the BENCH FRAME (2) and assemble one 4-1/2" PULLEY (38) to the BENCH RAME (2)
using one RH CAP (78), one BLACK RH CAP (77), one 3/8 X 3-3/4" BOLT (66), two 3/8 X 1"FLANGE SPACERS (55), two
3/8" SAE WASHERS (75), two 3/8" RH WASHERS (76), one CABLE CLIP (49) and one 3/8" LOW HEIGHT LOCK NUT (73)
as shown in FIGURE 33.
• Assemble the swivel end of LEG CABLE (45) to the PEDESTAL (7) using two RH CAPS (78), one 3/8 X 1-3/4" BOLT (62), two
3/8" SAE WASHERS (75), two 3/8" RH WASHERS (76), and one 3/8" LOW HEIGHT LOCK NUT (73). See FIGURE 33.
1
3/8 X 3-3/4" (93m) 66
78
73
38
45
55
76
75
23
7
62 3/8 X 1-3/4" (43m)
2
BLACK
77
73
49