Life Fitness Fit-1 Assembly Instructions Manual page 6

5
3/8 X 3"
(73m) 65
3/8 X 2-1/2"
(67m) 64
78
73
75
76
3/8 X 3-1/2"
(90m) 63
FIGURE 2
STEP 2:
• LOOSELY assemble the LEFT and RIGHT BOOM SUPPORTS (3 & 4) to the BASE (1) using eight RH CAPS (78), four 3/8 X 3-
1/2" BOLTS (63), eight 3/8" SAE WASHERS (75), eight 3/8" RH WASHERS (76) and four 3/8" LOW HEIGHT LOCK NUTS (73)
as shown in FIGURE 2.
• LOOSELY assemble the LEFT and RIGHT BOOM SUPPORTS (3 & 4) to the REAR UPRIGHT (5) using four RH CAPS (78), two
3/8 X 3" BOLTS (65), four 3/8" SAE WASHERS (75), four 3/8" RH WASHERS (76) and two 3/8" LOW HEIGHT LOCK NUTS
(73) as shown in FIGURE 2.
• LOOSELY assemble the CROSS SUPPORT (70) between the LEFT and RIGHT BOOM SUPPORTS (3 & 4) using eight RH CAPS
(78), four 3/8 X 2-1/2" BOLTS (64), eight 3/8" SAE WASHERS (75), eight 3/8" RH WASHERS (76) and four 3/8" LOW HEIGHT
LOCK NUTS (73) as shown in FIGURE 2.
3
4
70
6
1