Installing The Air Shroud - Supero 2027R-WRF User Manual

6-4

Installing the Air Shroud

Air shrouds concentrate airfl ow to maximize fan effi ciency. The SC213 chassis air
shroud does not require screws for installation.
Installing the Air Shroud in the Chassis (Figure 6-4)
1. Lay the chassis on a fl at, stable surface and remove the chassis cover.
2. Ensure that the motherboard, CPU, heatsink and memory are all properly
installed.
3. Remove the left side break-away piece of the main air shroud.
4. Slide the additional air shroud into the chassis before installing the main air
shroud.
5. Install the main air shroud in the chassis. The air shroud fi ts just behind the
three fans in the fan rack. Slide the air shroud into the grooves just behind
the fan rack (Figure 6-4).
Note that some motherboards may require the air shroud to be modifi ed to
fi t over the motherboard. The SC213 chassis air shroud is designed with
break-away pieces that may be removed to accomodate differing styles of
motherboards.
Figure 6-4: Air Shroud Installation
1
4
6-5
Chapter 6: Advanced Chassis Setup
1
5