Installing The Add-On Cards - Supero 2027R-WRF User Manual

SUPERSERVER 2027R-WRF USER'S MANUAL
6-6

Installing the Add-on Cards

Add-on card installation in the SC213 chassis requires the installation of a riser card.
Installing the Riser Card (Figure 6-8)
1. Remove the chassis cover.
2. Remove the riser bracket.
3. Install the riser card onto the riser bracket. Note that there are different cards
for the right and left side of the bracket.
4. Gently slide the riser card bracket with the riser card installed into the chassis
and simultaneously plug the riser card into the slot on the motherboard.
5. Locate the three screws on your riser card bracket and secure it to the
chassis as illustrated above.
Secure the tail
of the riser card
bracket to the
fan tray with one
screw
Figure 6-8: Installing the Riser Card Bracket
6-10
Secure the head
of the riser card
bracket to the rear
of the chassis with
two screws