How To Connect Two Sets Coovox Ip Pbxs In Different Network - Zycoo CooVox-U20 User Manual

Check the created calling rule, save and activate.
Step4: Create dialrule on CooVox-U50-B, add the created dialrule to the dialplan as the same
way of Step 3.
Step 5: Activate the current configuration and test:
1. Register IP Phone to U50-A as extension 601.
2. Register another IP Phone to U50-B as extension 801.
3. Make a call from 801 to 601, 601 rings and the call is connected.
4. Make a call from 601 to 801, 801 rings, and the call is connected.

8.3 How to connect two sets CooVox IP PBXs in different network?

E.g.: two sets CooVox-U50 in the internet.
Normally, the two sets CooVox-U50 are located in different place; but they are in the internet,
and have public IP address.
Note: Enable NAT on Router.
For external line configuration, you must use public IP address.
Take the following instructions as example:
Register U50-B IP to a trunk of U50-A with authentication.
Configuration Rule:
1. IP Phone registers on U50-A as extension 601.
2. Another IP Phone registers on U50-B as extension 801.
3. U50-A IP:192.168.1.100.
4. U50-B IP:192.168.1.200.
5. Extension format of U50-A: 6XX.
6. Extension format of U50-B: 8XX
7. Create an extension 888 with password 123456 on U50-B.
87 Copyright © ZYCOO All rights reserved. V1.0