Extension Settings - Zycoo CooVox-U20 User Manual

Extension Settings:

Item
SIP/IAX2
Name
Extension
Password
Outbound CID
Dial Plan
Analog Phone
Voicemail
VM Password
Delete VMail
Email
(FAX/Voicemail)
Web Manager
Agent
Call Waiting
Allowing Being Spied
NAT
Pickup Group
Mobility Extension
Transport
SRTP
DTMF Mode
Video Call
Permit IP
Audio Codecs
Notice:
There are 30 default extensions which number started with "8"*; you can add or delete
1.
extension by your requirement.
2. Maximum extensions: 100
Choose extension protocol.
Extension Name (English Character Only), e.g.: Tom.
Extension Number connected to the phone, e.g.: 888.
Same password as voicemail. (4-16 digits, e.g.:123456)
Override the caller ID when dialing out with a trunk.
Please choose the Dial Plan which is defined in the menu "Outbound Routes".
Please choose the relative FXS port for your analog phone.
Check this option to enable the voicemail account.
Set password for Voicemail, for security reasons, do not use the extension number or
any easy combination like "1234"
Check this option to delete voicemail from the PBX after it's sent by email.
Extension user's email address to receive email messages with attached fax or
voicemail (you need configure
Tom@gmail.com
Allow this user to login to the Extension Management Panel to manage extension
options including voicemail, call recording, call transfer, etc when you select this option.
Check this option to set this extension user as agent.
Enable call waiting
Check this option to allow this extension to be monitored (listened to or "spied").
Check this option if extension user or the phone is located outside the NAT(Network
Address Translation) available gateway.
Select the Pickup Group which the extension user belongs to.
After check this option, you must set mobility extension number. User can make calls to
the IP PBX server with this mobility number, and have all rights of this extension, e.g.:
Outbound Call, Internal Call, Listen to the voicemail.
Select the Transport Protocol: UDP, TCP, TLS
Enable SRTP (Secure Real-time Transport Protocol)
Default DTMF is rfc2833. It can be changed if necessary..
Check to enable video calling for this extension. And select the video codecs you need
to use.
Set device ip address or subnet permitted to register this extension with the IP PBX,
e.g.:192.168.1.77 or 192.168.10.0/255.255.255.0. Devices with other IP addresses are
not allowed to register this extension with the IP PBX.
Select what audio codecs you need to use.
19
Explanation
the fax to email/voicemail
Copyright © ZYCOO All rights reserved. V1.0
options), e.g.: