Chapter 2 Getting Started; Before Configuration; Before Making A Call; Login Ip Pbx - Zycoo CooVox-U20 User Manual

Chapter 2 Getting Started

(Take CooVox-U50 as example for the guide)

2.1 Before Configuration

What kind of IP Phones can be used with this device?
1.
2. SIP Extension: CooFone Series and ZP Series IP Phones provided by ZYCOO
(D30/ D30P/ D60)
Any standard SIP Phone based on SIP/ IAX2 protocol
(eg: CISCO, Grandstream, Yealink, Polycom, Siemens, Snom,etc.)

2.2 Before Making a Call

2.2.1 Login IP PBX

Getting IP Address
There are three ways to set the IP address: Static, DHCP, PPPoE.
Default IP: 192.168.1.100:9999
Notice: you have to add port number 9999 after this IP address.
Defaults and Function Key
1. Web Panel User name:
2. Web Panel Password:
3. *60
4. 900/901/902
5. #
6. *2
7. *
Administrator Login
After connecting the CooVox IP PBX to the local area network and setting your laptop to the
192.168.1.x subnet, launch the web browser and bring up the system login page by entering
the following URL: http://192.168.1.100:9999. You will see the login interface as below:
admin
admin
Enter Voicemail Box
Default three conference room numbers
Blind Transfer
Attended Transfer
Disconnect Call
15 Copyright © ZYCOO All rights reserved. V1.0