Atm Loopback - SONIQ CWR300ND-AU Instruction Manual

The following table describes the parameter and button of this page:
Field
Host
Run Ping

3.8.2 ATM Loopback

Choose Diagnostic > ATM Loopback. The page shown in the following figure
appears. In this page, you can use VCC loopback function to check the
connectivity of the VCC. The ATM loopback test is useful for troubleshooting
problems with the DSLAM and ATM network.
Enter the valid IP address or domain name.
Click it to start to Ping.
- 96 -
Description